How do I use the controller simulator to test Modbus?
The simulator is based on the same software as the controller and therefore supports all of the same features. If...
Modbus
Using Modbus for remote management of the plunger lift controller
-
-
How do I use Vision to interact with the ALiEn2/ALiEn2 Expert or Sasquatch using Modbus?
Vision Device Management can connect to a physical controller using a serial port or to the simulator using TCP. The... -
How do I enable and configure Modbus on the ALiEn2/ALiEn2 Expert?
Modbus is a standard communication protocol that is supported by many devices. All ETC plunger lift controllers use COM1 as... -
Why can’t I get ALiEn2 or Sasquatch Modbus to work?
There are a number of common problems that can happen when trying to use Modbus with the ALiEn2 or Sasquatch.... -
What SCADA systems support the ALiEn2?
The ALiEn2 line of controllers will work with any SCADA system that supports standard Modbus. You can choose to implement... -
How do I get arrival, velocity, and kinetic energy data from from Sasquatch?
The Sasquatch calculates the surface velocity of the plunger on each arrival event. This is stored in a log with... -
How are ELAPSED TIME or date/time values stored in Modbus registers in ETC controllers and sensors?
ETC controllers that support Modbus have multiple options for storing date/time as well as elapsed time. This allows you to... -
Does AUTOSOL ACM server support ALiEn2?
Autosol has taken their standard Modbus driver and created a version specific to the ALiEn2 that helps to retrieve both... -
How do I change the Modbus communication settings on Sasquatch?
What you Need Before starting, you should make sure you have: A PC with Vision Device Management software A Link Device Connection (This... -
Why am I getting Checksum errors or invalid data from Sasquatch?
Whether you are using Vision or another piece of software or device, there are several things that have to be...
Submit a Support TicketSubmit a Ticket